МКМ Русия
TERRITORY FOR PARTNERSHIP
Bulgarian  English  Romanian
 
Корунд - Свръхтънка топлоизолация
About us
News
System WARM
Products
How to Install
Sellers
Gallery
Contact us
Products » Roll Polymer-Bituminous » Commercial Roofing » Unifleks
Unifleks class "BUSINESS"
Multipurpose SBS-modified torch-applied roofing and waterproofing material.
Product Modifications
The product comes surfaced either with smooth polymeric film (for waterproofing and underlayment of roof membrane) or coarse mineral granules (for cap sheets of roof membrane). Following is the brief description of Unifleks technical parameters.
Technical Data
Parameter Value
Type of modifier polymer SBS
Base material glass fabric fiberglass scrim polyester
Weight per 1 m2 (depending on the grade) 3.5-4.5
Tensile strength at break for 5 cm wide strip, N (kgf)
for glass fabric base
for polyester base

600(600)
600(400)
Flexibility: bend over R=10 mm mandrel, °С, max. -15°С
Softening point, °С, up to +110°С
Heat resistance in vertical position during 2 hrs, °С, min. +90°С
Water resistance at 0.2 MPa (20 m w.c.) during 2 hrs impermeable
Water resistance at 0.001 MPa during 72 hrs impermeable
Application Procedure
Unifleks is applied in single layer for renovation of existing roof membrane, or in two layers – for installation of new roof membrane or overhauling. The finish of protective (granular) surfacing conforms to the modern architectural concepts, thus allowing to apply the membrane on visible parts of the roof or waterproofing work without additional expenditure on improvement of external appearance.
Scope of Application
Due to the outstanding adhesive properties of SBS-modified bitumen Uniflex may be torch-applied on virtually any type of horizontal, slanting or vertical substrate made of non-flammable material (cement-sand screed, mineral fiber boards etc.) Compatibility with oxidized bitumen allows to use Uniflex for renovation of even old tar-paper roofing.
Copyright © 2004 - 2008 MKM BG GROUP You are visitor: