МКМ Русия
TERRITORY FOR PARTNERSHIP
Bulgarian  English  Romanian
 
Корунд - Свръхтънка топлоизолация
About us
News
System WARM
Products
How to Install
Sellers
Gallery
Contact us
Products » Roll Polymer-Bituminous » Commercial Roofing » Linokrom
Linokrom class "STANDART"
Torch-applied roofing and waterproofing material
Structural Makeup
Linokrom is a composition of rot-resistant reinforcing base (fiberglass scrim, glass fabric or non-woven polyester scrim) coated with 3 to 5 kg of high-quality oxidized bitumen binder.
Product Modifications
The product comes surfaced with either smooth polymeric film (for waterproofing and underlayment of roof membrane) or coarse mineral granules (for cap sheets of roof membrane). The brief description of Linokrom technical parameters is given below.
Technical Data
Parameter Value
Base material fiberglass scrim
glass fabric
Weight per 1 m2 (depending on the grade) 3.0-4.5
Tensile strength at break for 5 cm wide strip, N (kgf)
for glass fabric base
for fiberglass scrim base

500(400)
360(150)
Flexibility: bend over R=10 mm mandrel, °С, max. 0°С
Heat resistance in vertical position during 2 hrs, °С, min. +80°С
Water resistance at 0.001 MPa during 72 hrs impermeable
Application Procedure
Linokrom is applied in single layer for renovation of existing roof membrane, or in two layers – for installation of new roof membrane or overhauling. The finish of protective (granular) surfacing conforms to the modern architectural concepts, thus allowing to apply the membrane on visible parts of roof or waterproofing work without additional expenditure on improvement of external appearance.
Scope of Application
The increased thickness of Linokrom (at least 3 mm) and its torch-on application procedure instead of mopping allow to decrease the number of plies in waterproof membrane, simplify the installation process and make it much safer as compared with bitumen felt, accordingly resulting in considerable saving of funds.
Copyright © 2004 - 2008 MKM BG GROUP You are visitor: