 |
|
PRONTO® - adhesives è ground coats for thermo-insulations
|
 |
PRONTO® ® is a trade mark of MKM-BG GROUP Ltd.
Produced from ACTIV SIP Ltd. - Albena.
|
|
|
These are adhesives è ground coats with the highest parameters according cold resistance, elasticity and waterproofing, which are used for inner and out-door building insulations laying, for thermo-insulation panels pasting and for protective ground coats making.
|
 |
Adhesive for thermo-insulation PRONTO® 6
it is a dry homogeneous mixture, made from mineral and polymeric coupling substances, fillers with different fractions and supplements. It is mend for pasting of thermo-insulation panels from extruded or expanded polystyrene when placing thermo-insulations of buildings.
|
|
 |
Adhesive and ground coat for thermo-insulation PRONTO® 9
it is a dry homogeneous powdered mixture, made from cement, mineral and polymeric coupling substances, fillers with different fractions and supplements. The adhesive is mend for pasting of thermo-insulation panels from extruded or expanded polystyrene, FIBRAN, STIRODUR, STIROPOR, MONODUR, etc. and for protective ground coats making at inner and out-door building thermo-insulations laying. It is suitable for all plaster types concrete, aerated concrete, cement-coats, brickwork.
|
|
 |
Adhesive and ground coat for thermo-insulation PRONTO® 69
it is a dry homogeneous powdered mixture, made from cement, mineral and polymeric coupling substances, fillers with different fractions and supplements. The adhesive is mend for pasting of thermo-insulation panels from extruded or expanded polystyrene, FIBRAN, STIRODUR, STIROPOR, MONODUR, etc. and for protective ground coats making at inner and out-door building thermo-insulations laying. It is suitable for all plaster types concrete, aerated concrete, cement-coats, brickwork.
|
|
| |
PRONTO® 6 |
PRONTO® 9 |
PRONTO® 69 |
Cohesion strength at stretching with concrete,
kN/m2 |
790 |
910 |
970 |
| Cohesion strength at stretching with concrete after water sinking, kN/m2 |
720 |
870 |
925 |
| Cohesion strength at stretching with concrete after 5 cycles: water 20°C, drying 60°C, kN/m2 |
697 |
825 |
895 |
Cohesion strength at stretching with polystyrene,
kN/m2 |
148 |
160 |
170 |
| Cohesion strength at stretching with polystyrene after water sinking, kN/m2 |
117 |
130 |
130 |
| Cohesion strength at stretching with polystyrene after 3 cycles: water 20°C, drying 60°C, kN/m2 |
90 |
106 |
97 |
| Crack-resistance |
Not cracking at coating up to 5mm thick |
|
When working with PRONTO mixing of material with other materials is not allowed (including cement, water down of the prepared mixture after solidifying, pasting or ground coating onto wet or frozen surfaces, pasting or ground coating onto sun-lighted walls at temperature over 300°Ñ.
Do not place over at direct sin shining, high humidity, precipitation, rough wind and temperatures out of +50°Ñ - +300°Ñ. The Mixture prepares for work by mixing 100parts dry mixture PRONTO with 26 parts water. Mixed with the water material become ready for work for about 7-10 minutes. The prepared mixture can be used at temperature 200°Ñ min. 2 hours. The coating thickness must be between 2 mm and 10 mm.
|
|
|
|
)
)
)