 |
INSTA-STIK ÌÐ
Multi-Purpose Specially developed adhesive for plasterboard and insulation boards.
INSTA-STIK MP Multi-Purpose Adhesive is a polyurethane foam which has been specifically developed to adhere extruded and expanded polystyrene, polyurethane, polyisocyanurate, mineral wool and plaster boards to concrete, masonry, plaster, wood, metal, and to various bituminous substrates.
INSTA-STIK MP Multi-Purpose assures great flexibility as it can be applied both horizontally to floors as well as vertically to walls. It’s quick and easy to use, as the amount of adhesive can be regulated through the trigger and screw at the back of the applying gun, and can be applied directly to the substrate
|
 |
 |
Benefits of INSTA-STIK MP Multi-Purpose
Good adhesive tensile strength.
Simple, clean and quick to apply.
Low weight: easy to handle during transportation and on the building site.
High coverage: sufficient for approximately 13 m2 surface area per can (750 ml).
Clean in use – no dust or falling debris during installation.
No damage to substrate by mechanical fixation.
No thermal bridging.
No visible fasteners.
Minimum noise, vibration and disruption to building occupants.
No preparation time – INSTA-STIK MP Multi-Purpose can be used immediately with a PU spray gun.
No costly cleaning of tools or equipment.
Adhesive can continue to be used after interrupting the application.
Free from solvents and HCFC.
|
INSTA-STIK MP Multi-Purpose adhesive is compatible with the following insulation boards:
Extruded polystyrene boards (XPS).
Expanded polystyrene boards (EPS).
Fibre glass faced PUR/PIR boards.
Bituminous felt faced PUR/PIR boards.
Mineral wool boards.
Cellular glass insulation boards.
Cork insulation boards.
Wood fibre boards.
Foamed silica boards.
Phenolic foam.
|
 |
|
|
