This system has come to thermoinsolation in the form of continuous film on outside surface of the building. The method assure long life and excellent effect.
temperature interval for work is from +5°Ñ to + 35°Ñ;
do not work outside in strong wind directly lit by the sun and below +5°Ñ;
putting on the next cover (polymer mineral plaster and paints) to make after 7-10 days.
Assembly of heatinsolation flatnesses FIBRAN ECO BT on walls: First stage - hold the flatnesses by polymer glue for heatinsulation with cement base, which is put backside of heatinsulation flatnesses to make easy vertically hold them. If surface of the wall is very smooth, the glue is put by comb pallet on all surface of flatnesses FIBRAN ECO BT. After mechanical hold with a plastic plug in drilled holes through flatnesses and walls. In case of unequal walls the glue is put in shape of balls on the sheets , it is made easy their putting by stick toward the wall.THE PLUGS are put after 24 h in the place,where there is glue.If down layer is plaster and brickthe driller have to with 1mm thiner than PLUGS.If the base is concrete have to use the drill with the same size of THE PLUG.For better hold of flatnesses FIBRAN ECO BT is put like brickwork.
Stage stage - after fix the flatnesses FIBRAN ECO BT is put lining and ground coat of heatinsulation glue, rainforced with glassfibre net. While the linning is plastic stick the glassfibre net on the flatnesses. The ends of each stripes of the net have to cover each other least 10 cm.
Last stage - putting the polimer plaster, as complete element is recommended to put protective corner outline.
This system has come to thermoinsolation in the form of continuous film on outside surface of the building. The method assure long life and excellent effect.
